Electrical Project Builder
Plan a new home, renovation, granny flat, workshop, switchboard upgrade or other electrical project. We’ll build a recommended starting plan and help match it to suitable iSupply products and materials.
What are you working on?
Choose the closest project. The questions and recommendations change automatically.
Homes & everyday projects
Start with the main electrical project types.
Other projects & tools
Switchboards, supply cables, EV charging and specialist iSupply tools.
Tell us about the project
A few high-level answers are enough. We’ll create the first draft for you.
Your recommended electrical plan
This is a starting design. Increase, decrease or remove planning quantities before continuing.
Your iSupply project materials
Recommended products use current WooCommerce prices. Adjust quantities, select compatible alternatives and review installation-dependent technical notes before checkout.
Plan an Electrical Project Before You Buy
Use the iSupply Electrical Project Builder to organise common electrical requirements for new homes, renovations, granny flats, sheds, workshops, switchboard upgrades and other projects. The builder turns high-level project information into an editable planning list before matching suitable product categories and mapped products.
Power, Lighting & Switchgear
Plan room-by-room power points, light points, controls and related electrical fit-off items, then compare the result with iSupply’s switchgear and lighting ranges.
Circuit Schedule, Cable & Voltage Drop
Project Builder creates a provisional residential circuit schedule and planning cable/protection defaults. Route-specific current capacity and voltage drop can then be checked with the iSupply Voltage Drop Calculator.
TV & Antenna Systems
When free-to-air TV is included, Project Builder can use the existing iSupply Antenna Finder automatically from the project address and room TV-point count, while keeping the selected Iconic, TradeSave or Budget wall fit-out.
Electrical Project Builder FAQs
Does Project Builder replace an electrician or electrical design?
No. Project Builder creates an editable planning design, material list and provisional circuit schedule. Final cable current capacity, voltage drop, fault-loop performance, protection selection, manufacturer requirements and installation compliance still require licensed electrical verification.
Can I use it for a renovation or granny flat instead of a new home?
Yes. Project Builder has separate project types and changes the questions and planning logic based on the selected job.
Does the material list use current iSupply products?
Where an admin product mapping exists, the result reads the current WooCommerce product, price and stock status. Unmapped requirements are shown as needing product mapping or review rather than being silently substituted.
