Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.
Showing 417–432 of 749 results
Electrical insulated mats isolate the operator from the ground and protects the worker from ground potential. Key Features: Size: 1m x 10m Class: Class 0 1000V Thickness: 2.2mm Weight: 35kg Colour: Grey Manufactured with EPDM rubber to ensure flexibility and protection against ozone cracking Anti-slip finish on both sides Standards: AS/NZS IEC 61111 IEC 61111…
Electrical insulated mats isolate the operator from the ground and protects the worker from ground potential. Key Features: Size: 1m x 10m Class: Class 2 17000V Thickness: 2.6mm Weight: 37kg Colour: Grey Manufactured with EPDM rubber to ensure flexibility and protection against ozone cracking Anti-slip finish on both sides Standards: AS/NZS IEC 61111 IEC 61111…
Electrical insulated mats isolate the operator from the ground and protects the worker from ground potential. Key Features: Size: 1m x 10m Class: Class 4 36000V Thickness: 5mm Weight: 86kg per meter Colour: Grey Manufactured with EPDM rubber to ensure flexibility and protection against ozone cracking Anti-slip finish on both sides Standards: AS/NZS IEC 61111…
Our Telescopic Insulated Sticks are rated to 220kV, made from high grade electrical rated fibreglass and allows access to electrical systems from a safe working distance. Our Insulated Stick Kit comes with a protective carry bag to allow for easier transportation of the insulated stick and any extra attachments. A nylon Fuse Puller and disconnect…
Our Telescopic Insulated Sticks are rated to 220kV, made from high grade electrical rated fibreglass and allows access to electrical systems from a safe working distance. Our Insulated Stick Kit comes with a protective carry bag to allow for easier transportation of the insulated stick and any extra attachments. A Nylon Fuse Puller and disconnect…
Our Telescopic Insulated Sticks are rated to 220kV, made from high grade electrical rated fibreglass and allows access to electrical systems from a safe working distance. Our Insulated Stick Kit comes with a protective carry bag to allow for easier transportation of the insulated stick and any extra attachments. A Nylon Fuse Puller and disconnect…
Our Telescopic Insulated Sticks are rated to 220kV, made from high grade electrical rated fibreglass and allows access to electrical systems from a safe working distance. Our Insulated Stick Kit comes with a protective carry bag to allow for easier transportation of the insulated stick and any extra attachments. A Nylon Fuse Puller and disconnect…
Our Telescopic Insulated Sticks are rated to 220kV, made from high grade electrical rated fibreglass and allows access to electrical systems from a safe working distance. Our Insulated Stick Kit comes with a protective carry bag to allow for easier transportation of the insulated stick and any extra attachments. A Nylon Fuse Puller and disconnect…
BSD’s Insulating Blanket Clamp/Clip, made in Germany, is made of non-conductive highly durable PE, and allows you securely clamp LV Busbar Covers or HV Blankets. Key Features: Small Size – Small: 80mm x 45mm x 15mm Jaw Maximum Width – Small: 20mm Jaw Throat Depth – Small: 25mm Large Size – Large: 150mm x 95mm…
BSD’s Insulating Blanket Clamp/Clip, made in Germany, is made of non-conductive highly durable PE, and allows you securely clamp LV Busbar Covers or HV Blankets. Key Features: Small Size – Small: 80mm x 45mm x 15mm Jaw Maximum Width – Small: 20mm Jaw Throat Depth – Small: 25mm Large Size – Large: 150mm x 95mm…
Volt Safety’s Isolate Here In Emergency Sign is lightweight, durable and concise. Used in the process of safely performing rescue from a live LV switchboard panel, the sign informs the Safety observer of the electricity isolation point. Key Features: Size: 20cm x 16cm x 1cm Lightweight, durable polypropylene Attached rope allows the sign to be…
Linq’s Lanyard with Absorber 1.85m with 2 Snap Hooks ensures safety while working at heights by slowing the rate of the fall, and reducing fall arrest forces. If you have additional or varied requirements, please ask about our other height safety options! Key Features: Length: 1.85m UV resilient and Solvent resistant 100 newton (10kg) breaking…
Volt Safety’s Large Clamp Circuit Breaker Lockout is suitable to lockout most 480V – 600V Circuits. Does not require a slotted screwdriver to adjust. If you have additional or varied requirements, please ask about our other Lockout options! Key Features: Colour: Red and Black Size: 100mm x 60mm x 95mm Made with durable PA reinforced…
Volt’s Lockout Bag Large is ideal for large amounts of lockout equipment, meters or cables. Quality construction with internal padding ensures that your items stay safe and secure. Key Features: Colour: Black and Yellow Internal Size: 44cm width x 16cm depth x 20cm height Convenient carry handle to carry the lockout bag and it’s contents…
Volt’s Lockout Bag Medium is ideal for small to medium amounts of lockout equipment. Quality construction with internal padding ensures that your items stay safe and secure. Can also be used to store two hand held meters in the one bag. Key Features: Colour: Red Internal Size: 27cm width x 29cm depth x 6cm height…
Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.
Looks like you haven't made a choice yet.