FANTECHTRADE ProVent In-Line Duct Mounted Provent series 150mm Timmer FANRIL-150TSW
$485.99 inc GST
65 in stock
Fast Shipping
On All Orders
15+ Years
Industry Experience
Australian Company
Owned & Operated
Easy Returns
30 Days Peace Of Mind
Description
Description
The ProVent Series of in-line mixed-flow fans have been specifically designed for ducted supply or exhaust air applications.
There are 6 models in the range matching standard duct sizes from 100 to 200mm diameter.
There are 6 models in the range matching standard duct sizes from 100 to 200mm diameter.
Features
- High-performance mixed-flow Impeller.
- Models 150SW and 200SW include an external mounted 2-speed switch.
- Models 150TSW and 200TSW include a 1-30 minute adjustable run-on timer and an external mounted 2-speed switch.
- Fans can be removed for maintenance or repair without disturbing the duct system via specially designed support brackets.
- Integrated mounting foot makes installation easier.
- All models include plug and lead for easy installation.
- Can be mounted in any position.
Construction
The housings are of reinforced, injection moulded polypropylene plastic.
The mixed-flow impellers are of injection moulded plastic.
The housings are of reinforced, injection moulded polypropylene plastic.
The mixed-flow impellers are of injection moulded plastic.
Motors
Type – 2-speed, squirrel cage, capacitor run.
Electricity supply – 230V, single-phase, 50Hz.
Class B insulation, IP44.
Bearings – sleeve for RIL-100 and RIL-125, ball for all other models.
Speed-controllable using VA type speed controller in high speed setting only.
The RIL-150TSW and RIL-200TSW cannot be speed controlled.
Type – 2-speed, squirrel cage, capacitor run.
Electricity supply – 230V, single-phase, 50Hz.
Class B insulation, IP44.
Bearings – sleeve for RIL-100 and RIL-125, ball for all other models.
Speed-controllable using VA type speed controller in high speed setting only.
The RIL-150TSW and RIL-200TSW cannot be speed controlled.
Internal Thermal Protection
By fuse to size 125 and for all other models manual-reset thermal overload protection device in accordance with a mandatory requirement for in-duct fans AS/NZS60335-2-80:2004
By fuse to size 125 and for all other models manual-reset thermal overload protection device in accordance with a mandatory requirement for in-duct fans AS/NZS60335-2-80:2004
Testing
Airflow to ISO5801:Part1, 1997
Noise to BS848:Part 2, 1985
Meets requirements of AS/NZS60335-2-80:2004
Airflow to ISO5801:Part1, 1997
Noise to BS848:Part 2, 1985
Meets requirements of AS/NZS60335-2-80:2004
Special Note
Timer models RIL-150TSW and RIL-200TSW include a plug and lead to suit the HPM 4 pin socket.
Avoid the use of spring-loaded backdraft dampers, extensive lengths of the duct and air valves with the RIL-100 and RIL-125 models.
Timer models RIL-150TSW and RIL-200TSW include a plug and lead to suit the HPM 4 pin socket.
Avoid the use of spring-loaded backdraft dampers, extensive lengths of the duct and air valves with the RIL-100 and RIL-125 models.
Suggested Specification
The in-line fans shall be of the ProVent Series as supplied by Fantech Pty Ltd and be of the model numbers shown on the schedule/drawings.
Impellers shall be of a mixed-flow design and driven by a single-phase motor. Internal thermal protection shall be by fuse on 100 and 125mm spigot models and by manual-reset on 150 and 200mm models.
It shall include an integral mounting foot, plug and lead and specially designed support brackets to enable motor removal.
All fans shall be fully tested to ISO5801: Part1, 1997 for airflow and BS848:Part 2, 1985 for noise.
Additional information
| Brand | |
|---|---|
| MPN |
