CABAC AL RED. LINK 240MM2 TO 120MM2 ALKR240/120 x 1/EACH

Description

Built for High-Load Performance on Site

This aluminium reducing link connects 240 mm² to 120 mm² aluminium conductors cleanly and efficiently, making it ideal for upgrading, downsizing, or transitioning cable sizes on commercial and industrial installs. Manufactured from 99.6% pure aluminium and fully annealed for ductility, it delivers strong electrical performance with low resistivity and reliable conductivity under load. Designed for stranded sector and circular stranded aluminium conductors, it crimps securely using standard Australian hex tooling—no special equipment, no guesswork—so you can get connections done right the first time and keep jobs moving.

Proven Reliability & Full Standards Compliance

Built as a barrier-type aluminium reducing link, this connector provides an impermeable seal against oils and water, making it suitable for demanding environments and long-term installations. It’s compliant with AS/NZS 4325 Part 1 and aligned with major international standards including IEC, DIN/VDE, JIS, BS, and UL/NEMA—giving confidence on inspections, audits, and handover. With an operating temperature range from -20 °C to +140 °C, it’s engineered to perform consistently across Australian site conditions without compromising safety or longevity.

Trade-Friendly Installation & Fast Procurement

Designed with the trade in mind, this reducing link uses standard crimp dies for both conductor sizes, keeping installs efficient and familiar for licensed electricians. Clear crimp guidance helps avoid damage at the centre barrier, reducing rework and downtime on site. Backed by a specialist electrical wholesaler with strong stock availability, trade pricing, and fast delivery or Sydney pick-up, it’s an easy add-to-cart solution when timelines are tight and reliability matters.

Key Specs

• Nominal Conductor Size: 240 mm² / 120 mm²

• Conductor Type: Stranded sector and circular stranded aluminium

• Conductive Material: Aluminium, 99.6% pure

• Tensile Strength: 110 MPa

• Ductile Strength: 28%

• Electrical Resistivity: 2.6 micro-ohm cm (max)

• Conductivity: 61.8% IACS (min)

• Operating Temperature: -20 °C to +140 °C

• Compliance: AS/NZS 4325 Part 1; IEC, DIN/VDE, JIS, BS, UL/NEMA

Large End (240 mm²):

• A/F Hex: 28.4 mm

• Number of Crimps: 2

• Crimp Die: HT-240/300AL

Small End (120 mm²):

• A/F Hex: 17.3 mm

• Number of Crimps: 2

• Crimp Die: HT-95/120AL

Ideal For

• Licensed electricians and electrical contractors

• Commercial and industrial cable terminations

• Reducing conductor sizes in switchboards and distribution systems

• Installations requiring oil and water barrier protection

• Projects needing compliant, trade-approved aluminium connections