CABAC AL RED. LINK 150MM2 TO 50MM2 ALKR150/50 x 1/EACH

Description

Built for High-Current Performance on Site

The CABAC Aluminium Reducing Link 150mm² to 50mm² (ALKR150/50) is designed for joining dissimilar aluminium conductor sizes quickly and securely on demanding jobs. Suitable for stranded sector and circular stranded aluminium conductors, it delivers a reliable, low-resistance connection that holds up under load. The barrier-type design helps protect the joint from oils and moisture, making it ideal for switchboards, distribution equipment, and industrial installations where performance can’t be compromised. With a fully annealed aluminium body, this reducing link crimps cleanly using standard Australian tooling, keeping install time down and consistency high across multiple terminations.

Trade-Grade Reliability & Standards Compliance

When compliance matters, this aluminium reducing link ticks the right boxes. Manufactured from 99.6% pure aluminium, it offers strong electrical conductivity and dependable mechanical performance across a wide operating temperature range. The design meets key international and Australian standards, giving confidence for use on regulated commercial and industrial sites. The centre barrier allows correct positioning during crimping while helping maintain an impermeable seal—just avoid crimping too close to the barrier to ensure long-term durability and prevent shear. It’s a dependable choice when inspections, sign-off, and long service life are non-negotiable.

Made for Fast, Hassle-Free Trade Installations

This CABAC AL RED. LINK 150MM2 TO 50MM2 is built for electricians who need to move fast without reworking terminations. It’s compatible with standard hex dies and commonly used Australian crimping tools, so there’s no need for special gear on site. Clear large-end and small-end crimp requirements make installation straightforward, even on tight schedules. Whether you’re handling a one-off upgrade or multiple boards across a project, having the right aluminium reducing link on hand helps reduce downtime, avoid delays, and keep crews productive.

Key Specs

• Nominal Conductor: 150/50 mm²

• Stranding Metric: 37/2.25 – 19/1.78

• K Dimension: 32 mm

• M Dimension: 9.50 mm

• Conductive Material: Aluminium, 99.6% pure

• Tensile Strength: 110 MPa

• Ductile Strength: 28%

• Final Metal State: Fully Annealed

• Electrical Resistivity: 2.6 micro-ohm cm (max)

• Conductivity: 61.8% IACS (min)

• Operating Temperature: -20°C to +140°C

Large End (150mm²)

• A/F Hex: 22.0 mm

• Number of Crimps: 2

• Crimp Die (Aluminium): HT-150/185AL

Small End (50mm²)

• A/F Hex: 13.2 mm

• Number of Crimps: 1

• Crimp Die (Aluminium): HT-50/70AL

Standards & Compliance

• AS/NZS 4325 Part 1

• IEC (France)

• DIN/VDE (Germany)

• JIS (Japan)

• BS (United Kingdom)

• UL/NEMA (USA)

Ideal For

• Licensed electricians and electrical contractors

• Switchboard and distribution board installations

• Industrial and commercial power upgrades

• Reducing larger aluminium conductors to smaller sizes

• Projects requiring compliant, moisture-resistant terminations