CABAC CU DOUBLE GRIP LUG95MM2 CABLE 12MM STUD CAL95-12DG x 1/EACH

Description

Product Description

Copper Double Grip Lug



Copper Double Grip Lugs are designed for high vibration and critical terminations, particularly with flexible cables. The flared barrel of the lug is crimped onto the insulation of the cable, creating a termination capable of withstanding high vibration forces. The barrels of the lugs are normal Australian dimensions and are crimped using standard Australian dies.



When crimping flexible cables please follow the directions on our fact sheet ‘Rules for Crimping Fine Stranded Cable’, since the tooling may have to be de-rated due to higher crimping forces (see Useful Information).



The flared barrel should be test crimped with the recommended die, however since insulation thicknesses vary, a smaller or larger die may suit. This crimp dimension is not critical because it is simply an insulation support.

Standards and Compliance

AS/NZS4325 Part 1; IEC France; DIN/VDE Germany; JIS Japan; BS United Kingdom; UL/NEMA USA

Test reports are available on request


Technical Data

Nominal Cable (mm2): 95

ID Barrel (mm): 13.6

ID Flare (mm): 17.8

Stud: 12



Conductive Material

Copper 99.95% pure

Oxygen content 30 p.p.m Max.

Tensile strength 200 MPa

Ductile rating 40%

Final metal state fully annealed



Electroplating Material

Tin 99.9% pure

Other metals lead + antimony

Thickness 5 -10 microns



General Electrical Properties

Total conductivity 99.7% IACS

Total resistivity: 1.738 micro-ohm cm



Operating Temperature

-55 to 155 deg C due to oxygen-free copper



Dimensional Specification

Tooling is interchangeable between CABAC, Utilux and Burndy