CABAC CU CIRC BREAKER LUG 185MM 10MM STUD CALCB185-10 x 1/EACH

Description

Product Description

Copper Circuit Breaker Lugs



CABAC Circuit Breaker Lugs are specially made for terminating large cables to circuit breakers. Since flashover distances have reduced, the connecting tunnel in breakers has become narrower, and fitting lugs in 150 to 250A breakers has become a problem because the palms of conventional lugs are too wide. This range of lugs have the same barrel dimensions as the standard range, so normal crimping rules apply, using the correct die for the cable size.



Many switchboard builders use flexible cables and this lug features a unique bell mouth, which makes insertion of fine stranded conductors much easier.



Made from 99.9%+ cu high conductivity copper, this lug provides the best electrical properties possible.



If a lug is not listed for your application please contact CABAC sales, as we are continually adding to the range.

Standards and Compliance

AS/NZS4325 Part 1; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and UL/NEMA USA

Test reports are available on request


Technical Data

Nominal Conductor (mm2): 185

ID Size (mm): 18.4

Stud (mm): 10

Qty Per Box: 10



Conductive Material

Copper 99.95% pure

Oxygen content 30 p.p.m Max.

Tensile strength 200 MPa

Ductile rating 40%

Final metal state fully annealed



Electroplating Material

Tin 99.9% pure

Other metals lead + antimony

Thickness 5 -10 microns



General Electrical Properties

Total conductivity 99.7% IACS

Total resistivity: 1.738 micro-ohm cm



Operating Temperature

-55 to 155 deg C due to oxygen-free copper



Dimensional Specification

Tooling is interchangeable between CABAC, Utilux and Burndy