CABAC Voltfinger inc Torch CATIII 600v (1/each) T7150

Description

Product Description
The T7150 is packed with features including continuity and live line indication, a built-in torch, and a high-quality chrome vanadium molybdenum steel screwdriver tip that fits into Australian socket outlets.

Indication of Voltage or Continuity is both audible and visual.

T7150 Features
– Single pole test through screwdriver
– AC Voltage 50-600V (optical and acoustical)
– Direct contact and non-contact method selectable
– Continuity test from 0-3 M?
– High-quality screwdriver tip
– Quick and accurate detection of cable breaks
– Detect presence of voltage at outlets, lighting fixtures, circuit breakers
– Super flashlight via LED in front tip
– Glow lamp in back cap
– Audible alarm warning when voltage present
– 3 switchable positions to select functions

Safety and Compliance
IEC611010-1 CATIII 600V Pollution degree 2

WARNING! Do not take risks. Serious injury or death may result if not used correctly. Non-contact voltage detectors are only to be used by a competent person after reading the instruction.

CAUTION! Non-contact voltage detectors must be proven on a known live source before and after testing. An absence of detection does not mean the circuit under test is dead.

Technical Data
Voltage: 50 ~ 600 V
Continuity: 0 to 3 M?
Frequency: 50 to 500 Hz

Supplied with a blister pack, screwdriver tip rubber shroud, and operating manual.

Battery: 2 x 1.5V AAA
Dimensions: 160 x 25 x 21 mm
Weight: 50g