Cabac HEATSHRINK THIN WALL 25.4MM BLACK 1.2M XLP25BK-5M

Description

Flame-retardant tubing made from Electron Beam Cross-Linked Polyolefin
Operating temperature: -75 to +135 degrees Celsius
Resistant to common fluids, solvents and abrasion
UV resistant

Product Description

The CABAC XLP range of thin-walled heat-shrink tubing is used to insulate, protect and colour-code conductors in a range of applications related to the electrical and associated industries. This general-purpose heat shrink provides electrical and mechanical
protection, while also defending against environmental factors such as common fluids and/or solvents. Our black, thin-walled heat-shrink sleeve is flexible, flame-retardant, and resistant to impact, abrasion and UV radiation.

The XLP range of heat-shrink tubing is made from polyolefin that has been cross-linked using high-energy electron beam technology. Upon the application of heat, the tubing will shrink down to approximately 50% of its pre-shrink diameter to deliver tight-fitting
electrical and environmental insulation. To shrink our heat-shrink tubing, we recommend the use of a CABAC heat gun (Part No. HG2232 or HG2233).

CABAC black polyolefin heat shrink tubing is UL certified and complies with a number of international standards, including ASTM D2671.

Dimensions

Pre-shrink diameter: 25.4mm

After-shrink diameter: 12.7mm

Recovered wall thickness: 0.87mm

Length: 4 feet (1.2 metres)

XLP tubing is available in a wide range of colours and sizes, from 1.5mm to 125mm. The product datasheet includes a selection chart for your reference; see Resources.

Technical Data

Compliant Standards: UL224 VW1 File No. E366157, ASTM D2671

Continuous Operating Temperature: -75 to +135 degrees Celsius

Shrinkage Temperature: > 105 degrees Celsius

Longitudinal Shrinkage: < 5%

Tensile Strength: 10.4 MPa

Breakdown Voltage: 25 kV/mm wall thickness

Elongation at Break Point: 400%

Water Absorption: 0.15% max

Voltage Rating: 600V

Heat Shock: 250 degrees for 4 hours

PLEASE NOTE: The full range of XLP heatshrink is UV stabilised, except clear. Non-black colour variants will fade slightly or change colour over time, depending upon the strength of the UV radiation, without impacting the materials functional characteristics.

Technical Specifications

Product Colour: Black

Wall: Thin

Pre-Shrink Diameter (mm): 25.4

After-Shrink Diameter (mm): 0.87

Heatshrink Tube Length (M): 1.2

Recovered Wall Thickness (mm): 12.7

Glue-lined: No